Filter
Top Products
A – Port- and HBA-level Parameters
HBA-level Parameters
A-10 SN0054621-00 E
S
HBA-level Parameters
Table A-2 lists the HBA parameters and their values. To view all HBA parameters,
both configurable and non-configurable (read-only), use the -ch option in
non-interactive mode. To edit configurable parameters, use the -nh option in
non-interactive mode.
NOTE:
The parameters in this table are sorted alphabetically for ease of use.
Table A-2. HBA Settings
Parameter Value Alias Description
HBA_Alias Character string HBAALIAS HBA alias name. Symbolic name
you assign to the HBA for identifi-
cation purposes.
HBA_Default_Fragment_
Reass_Timeout
40 to 600 (units are
1/10 secs)
HBADFRT For QLE406x HBAs only. Default
value for the IP Fragment Reas-
sembly Timeout.
HBA_Delayed_ACK on or off HBADELACK For QLE406x HBAs only. Deter-
mines what occurs when the HBA
receives a Data-In PDU with the
final bit set and no status reported.
When on, the HBA immediately
sends a TCP acknowledgment
(this is the default value). When
this parameter is off, the HBA
delays the acknowledgment and
waits for more data.
HBA_Reserved_TCP_
Config
(Request assistance
from QLogic Support)
HBARTCPC For QLE406x HBAs only. A
parameter with control bits for vari-
ous TCP algorithms in the firm-
ware. Do not modify without
instruction of valid configuration
values provided by QLogic.
HBA_TCP_MAX_
Window_Size
4096 to 65535 HBATCPMWS The maximum TCP Receive Win-
dow size in bytes.