Filter
Top Products
4 – Interactive Mode Commands
Port Level Info & Operations Menu
SN0054621-00 E 4-41
A
3. From the HBA CHAP Menu, make changes as needed by selecting from
the following options:
1. Display CHAP table (see page 4-41)
2. Display Targets Using CHAP Entries (see page 4-41)
3. Assign a CHAP Entry to a Target (see page 4-42)
4. Add a CHAP Entry (see page 4-42)
5. Add a Default BIDI CHAP (see page 4-43)
6. Edit a CHAP Entry (see page 4-43)
7. Delete a CHAP Entry (see page 4-44)
8. Select HBA Port (see page 4-49)
9. Save Target/CHAP Changes (see page 4-44)
10. Refresh (see page 4-49)
11. Exit (see page 4-50)
Display CHAP Table
(CLI Option -dspchap)
Select the Display CHAP Table option to view the CHAP table, which is an array
of records containing CHAP names and secrets used by the HBA during CHAP
authentication. For example:
CHAP TABLE
Entry: 1 <DEFAULT BIDI CHAP entry>
Name:
Secret: jonathan
This is a BIDI Chap entry
Entry: 2
Name: tyler
Secret: qlogic
Entry: 4
Name: randy
Secret: qlogic
Press the Enter key to continue.
Display Targets Using CHAP Entries
(CLI Option -chapmap)
Select the Display Targets Using CHAP Entries option to view the following
information about each target that has a CHAP:
Target ID (target ID of this target as assigned by QLogic software)
IP address (IP address of the target)
Port (port ID for iSCSI targets as defined by the iSCSI standard)
iSCSI name (target iSCSI name as defined by the iSCSI standard)
Alias (target iSCSI alias name as defined by the manufacturer software)