Filter
Top Products
4 – Interactive Mode Commands
4-4 SN0054621-00 E
S
2. Port Network Settings Menu
(see
page 4-20)
1. Display Network Settings (see page 4-20)
2. Configure IP Settings (see page 4-21)
3. iSNS Settings (see page 4-21)
4. Select HBA Port (see page 4-49)
5. Save Changes and Reset HBA (see page 4-18)
6. Refresh (see page 4-49)
7. Exit (see page 4-50)
3. Edit Configured Port Settings Menu
(see page 4-22)
1. Display Configured Port Settings (see page 4-22)
2. Change Port iSCSI Alias Name (see page 4-22)
3. Port Firmware Settings Men
u (see page 4-23)
1. Display Configured Port Settings (see page 4-23)
2. Edit a Specific Port Setting (see page 4-24)
3. Configure iSCSI Settings (see page 4-24)
4. Configure Firmware Settings (see page 4-25)
5. Configure Device Settings (see page 4-25)
6. Configure Basic Settings (see page 4-26)
7. Configure Advanced Settings (see page 4-26)
8. Configure IPv6 Settings (see page 4-27)
9. Configure IPv6 TCP Settings (see page 4-28)
10. Save Changes and Reset HBA (see page 4-18)
11. Select HBA Port (see page 4-49)
12. Refresh (see page 4-49)
13. Exit (see page 4-50)
4. Legacy QLA4010 Restore Default Port Settings (see page 4-28)
5. Select HBA Port (see page 4-49)
6. Save Changes and Reset HBA (if necessary) (see page 4-18)
7. Refresh (see page 4-49)
8. Exit (see page 4-50)
4. Port Restore Factory Defaults (see page 4-28)
Table 4-1. Command Line Interface Menu (Continued)
Level 1 Level 2 Level 3 Level 4