Filter
Top Products
D – Error Codes
Interactive Mode Error Codes
SN0054621-00 E D-3
A
138 CORE_ERR_INITFW_INVALID Invalid IP address in InitFW. Correct to save
changes.
139 CORE_ERR_SETBOOTCODE Bootcode save error.
140 CORE_ERR_INV_LUN LUN is invalid.
141 CORE_ERR_NO_LUN_INFO Cannot get LUN information for this target.
142 CORE_ERR_NOT_SUPPORTED_BY_
FW
Operation unsupported in current firmware ver-
sion.
143 CORE_ERR_BOOTCODE_ENABLED Operation not allowed with BOOTCODE is
enabled.
144 CORE_ERR_BOOTCODE_INVALID_
VENDORID
Vendor ID can only be 8 characters long.
145 CORE_ERR_BOOTCODE_INVALID_
ALTCLIENTID
Alt Client ID can only be 7 characters long.
146 CORE_ERR_BOOTCODE_MODE_
INVALID
Invalid Bootcode Mode.
Bootcode Mode not allowed for QLA4010.
For other HBAs with HBA DHCP off, allowed
modes are 1 and 2, with HBA DHCP on. Mode 3
is also allowed.
147 CORE_ERR_NO_IMP_HBAS No HBAs in specified file to import.
148 CORE_ERR_PARSING_ERROR Parsing error in the specified file.
149 CORE_ERR_INVALID_SOURCE_HBA Invalid source HBA provided for import.
150 CORE_ERR_BOOTCODE_CHECKSUM
_FAILURE
Checksum test failed: corrupt bootcode file or
problems during download.
Bootcode erased to avoid major HBA failure.
151 CORE_ERR_BOOT_TARGET Target is a boot target & bootcode boot is
enabled.
152 CORE_ERR_ZIP_FILE_NOT_FOUND Driver zip/inf file not found.
153 CORE_ERR_UNABLE_TO_UNZIP_
DRIVER_FILE
Unable to unzip driver file.
154 CORE_ERR_UNBLE_TO_GET_DRIVER
_VERSION_FROM_DRIVER_FILE
Unable to get driver version from the driver file.
155 CORE_ERR_UNABLE_TO_GET_INFO_
FROM_DIRVER_FILE
Unable to get info from driver file.
Table D-1. Interactive-Mode Error Code Descriptions (Continued)
Return Name Description