Filter
Top Products
3.4 <
Getting Started>
5 Select Typical installation for a network printer, and then click
Next.
6 The list of printers available on the network appears. Select the
printer you want to install from the list and then click Next.
• If you click the Advanced button, you can search a printer with the
SNMP Community Name. Default name is ‘public’.
• If you do not see your printer on the list, click Update to refresh the
list, or select Add TCP/IP Port to add your printer to the network.
To add the printer to the network, enter the port name and the IP
address for the printer.
To verify your printer’s IP address or the MAC address, print a
Network Configuration page. (See page 11.1 for "Printing a
machine report")
• To find a shared network printer (UNC Path), select Shared
Printer [UNC] and enter the shared name manually or find a
shared printer by clicking the Browse button.
Note
• If you are not sure of IP address, contact your network
administrator or print network information. (See
page 11.1 for "Printing a machine report")
• If you cannot find your machine in network, please turn off
the firewall and click Update.
7 After the installation is finished, a window appears asking you to
print a test page and to register yourself as a user of Samsung
printers in order to receive information from Samsung. If you so
desire, select the corresponding checkbox(es) and click Finish.
Note
• If your printer does not work properly after the installation, try
to reinstall the printer driver. See Software section.
• During the printer driver installation process, the driver installer
detects the location information for your operating system and
sets the default paper size for your machine. If you use a
different Windows location, you must change the paper size to
match the paper you usually use. Go to printer properties to
change the paper size after installation is complete.
Using the SetIP program
This program is for the network IP setting using the MAC address which
is the hardware serial number of the network printer card or interface.
Especially, it is for the network administrator to set several network IPs at
the same time. The following procedure is based on windows XP.
Note
• You can only use SetIP program when your machine is
connected to a network.
• You can only use IPv4 setting for Set IP.
• If you are in a non-static IP address environment and need to
setup a DHCP network protocol, go to the http://
developer.apple.com/networking/bonjour/download/, select
the program Bonjour for Windows due to your computer
operating system, and install the program. This program will
allow you to fix the network parameter automatically. Follow
the instruction in the installation window. This Bonjour
program does not support Linux
Installing the program
1 Insert the driver CD provided along with your machine. When the
driver CD runs automatically, close the window.
2 Start Windows Explorer and open the X drive. (X represents your
CD-ROM drive.)
3 Double click Application > SetIP.
4 Double click Setup.exe to install this program.
5 Select the language.
6 Follow the instructions in the window and complete the installation.
Starting the program
7 From the Windows Start menu, select Programs > Samsung
Printers > SetIP > SetIP.
8 Select the name of your printer and click .