Filter
Top Products
3.5 <
Getting Started>
Note
If you cannot find your printer name, click to refresh the
list.
9 Enter the network interface's MAC address, IP address, subnet
mask, default gateway, and then click Apply.
Note
If you do not know the network interface's MAC address,
print the machine's network information report. (See
page 11.1 for "Printing a machine report")
10 Click OK to confirm the settings.
11 Click Exit to close the SetIP program.
Altitude adjustment
The print quality is affected by atmospheric pressure, which is determined
by the height of the machine above sea level. The following information
will guide you on how to set your machine to the best print quality or best
quality of print.
Before you set the altitude value, find the altitude where you are using the
machine.
1 Press Machine Setup on the control panel.
2 Press Admin Setting.
3 When the login message appears, enter password with number
keypad and press OK. (Page 3.6)
4 Press the General tab.
5 Press Altitude Adjustment.
0
Value
Normal
High 1
High 2
High 3
6 Select appropriate option, and then click OK.
Note
Enter your machine’s IP address as the URL in a browser and
click Go to access the web site of your machine. Click Machine
Settings > Setup (or Machine Setup) > Altitude Adj. Select
the appropriate altitude value, and then click Apply.