Filter
Top Products
7.4 <
Scanning>
3 Enter the IP address in dotted decimal notation or as a host name.
4 Enter the server port number, from 1 to 65535.
The default port number is 88.
5 You can add a backup domain as a previous step.
6 Click Apply.
Network user authorized by SMB
1 Enter the domain that is used for SMB login.
2 Select IP Address or Host Name.
3 Enter the IP address in dotted decimal notation or as a host name.
4 Enter the server port number, from 1 to 65535.
The default port number is 139.
5 You can add a backup domain as a previous step.
6 Click Apply.
Note
User can add up to 6 alternate domains.
Network authorized user by LDAP
1 Enter your machine’s IP address as the URL in a browser and click
Go to access the web site of your machine.
2 Click Machine Settings and LDAP Server Setup.
3 Select IP Address or Host Name.
4 Enter the IP address in dotted decimal notation or as a host name.
5 Enter the server port number, from 1 to 65535.
The default port number is 389.
6 Enter Search Root Directory, the top search level of the LDAP
directory tree.
7 Select Authentication method. Two options for LDAP server login.
Anonymous: This is used to bind with null password and login ID
(Password and login ID are grayed out in SWS).
Simple: This is used to bind with the login ID and password in SWS.
8 Check the box next to Append Root to Base DN for adding Base
DN to login name.
9 Select Match User’s Login ID to the following LDAP attribute
(options are CN, UID, or UserPrincipalName).
10 Enter your login name, password, maximum number of search
results and search timeout.
Note
LDAP Referral: LDAP client will search referral server if the
LDAP server has no data to reply to query and if the LDAP
server has a referral server.
11 Select Serach Name Order that you desire.
12 Check the box next to "From:" Field Security Options.
Note
This option is only provided if you have selected the Network
authentication option in the user authentication setting. You
may check this option if you want to search for information in
a default email address group.
13 Click Apply.
Scanning originals and sending through email
(Scan to Email)
You can scan the originals and email the scanned image to several
destinations from the machine by email.
Sending a scanned image to several destinations
as an email attachment
1 Place the originals face up in the DADF. Or you can use the scanner
glass for one sheet of paper.
2 Press Scan to Email from the Main screen.
Note
If the authentication message shows, enter User Name
and Password. This message shows only when the network
administrator has set the authentication in SyncThru Web
Service. (Page 11.9)
3 Press the From tab and enter the sender’s email address.