Filter
Top Products
10.7 <
Machine status and advanced setup>
Authentication
This feature lets you control and lock all outgoing data, or change the
password.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, then enter
password and press OK.Press the Setup tab > Authentication.
IPv6 Machine supports IPv6 addresses for network
printing and managements.
• IPv6 Activate: When you select On, the Host
Name and Link-Local Address will
automatically be entered into the address
field.
• DHCPv6 Configuration: If you have a
DHCPv6 server on your network, you can set
one of the option for default dynamic host
configuration.
• Routers: Use DHCPv6 only when
requested by a router.
• DHCPv6 Addresses: Always use
DHCPv6 regardless of router request.
• DHCPv6 Off: Never use DHCPv6
regardless of router request.
Option Description
Authentication
Mode
No
Authentication
Mode
It disables
Authentication Mode
.
Network
Accounting
It enables the authentication mode
which is set from the Job Account
menu in the
SyncThru™ Web
Admin Service
.
Standard
Accounting
You can set the local account for a
certain user. If the user with that
account performs the printing job,
the machine counts it.
Option Description
Authentication
Mode
(continue)
Foreign Device
Interface
When you install the optional FDI
kit, select
On
to activate it.
•
Job Timer
: If there is not enough
credit, you can set the machine to
cancel a job right away or wait a
designated amount of time for a
deposit.
•
Print Job Control
: When it is
enabled, the both computer
printing and copying are possible
since the credit remains. With
Disable
, copy printing needs the
credit. However, when printing a
report or a fax, the credit is not
needed.
•
Inhibit Services
: When no credit
is left, the machine disables the
copy job only with
Copy Only
.
With
All Service
, scanning
service and copy job are
disabled.
•
Internal Credits
: It is used when
you cancel the job or when the
job is cancelled by the device due
to insufficient credits (coin) or is
canceled by user’s request. If you
select
Enable
, the machine
deposits a credit equal to the
number of sheets that did not
print out correctly, then it prints
next job for free (for the amount
deposited). With
Disable
, even if
you cancel the printing job, the
machine includes jammed paper
in the count and the cost of
printing shall be recovered for the
pages already billed.
•
Image Counter
: Depends on
whether the machine counts
blank white pages.
Change Admin. Password You can change the password
for the Admin Setting
authentication.
Option Description