Filter
Top Products
10.11 <
Machine status and advanced setup>
Report Configuration
Report
You can print a report on the
machine's overall configuration.
Fax Report You can set to print the information of
a fax reports.
• Multi Send Report: When you fax
to several destination, set this
option to print a transmission report.
On is to print every time you send a
fax, the machine prints a
confirmation report. With On-Error,
only when the transmission error
occurred, the report will be printed
out.
• Fax Send Report Appearance:
You can select whether the image
on the confirmation report shows or
not.
• Fax Sent/Received Report: The
machine stores the logs on each
transmission and prints out every
50 logs with this option On. It you
select Off, the machine stores the
logs but does not print.
• Fax Send Report: The machine
prints the confirmation report after
each fax job, only when you send a
fax to one destination.
Report
(Continue)
E-mail
Confirmation
Report
The report shows the job of scanning
and sending it via Scan to Email.
• On: The report is printed whether a
job successfully completed or
failed.
• Off: No report is printed after
completing a job.
• On-Error: Only in case of error
occurrence, the machine prints the
report.
Scan to Server
Confirmation
The report shows the job of scanning
and sending it via SMB and FTP.
• On: The report is printed whether a
job successfully completed or
failed.
• Off: No report is printed after
completing a job.
• On-Error: Only in case of error
occurrence, the machine prints the
report.
Clean Fuser You can clean the inside of a fuser
roller by printing a cleaning paper.
You can select among On, Off, Print
Now. Default setting is On.
Option Description
Note
You can also print machine's status information and browse
status with SyncThru Web Service. Open the web browser on
your networked computer and type the IP address of your
machine. When SyncThru Web Service opens, click
Information > Print information.