Filter
Top Products
10.9 <
Machine status and advanced setup>
Auto Color
Registration
The machine virtually prints certain patterned image
to calibrate the color printing position. This feature
enhances the colored image sharper and clearer,
which means the machine prints the colored image
on the paper more like the one in the monitor. Select
On to activate this feature. You can set the
frequency of performing the function by pages,
temperature of a machine or LSU.
• Page Condition: The machine performs this
feature after certain number of page has been
printed out.
• Inner Temperature Condition: The machine
performs this feature if the machine temperature is
different from the last this feature done. If you set
this option to 3, the machine detects the inner
temperature, and when the temperature difference
is over or below three degree, the machine will
perform this feature. You can set the temperature
difference by clicking arrows.
• LSU Temperature Condition: The machine
performs this feature if the temperature of
LSU(Laser Scanning Unit) is different from the last
this feature done. If you set this option to 3, the
machine detects the temperature of LSU, and
when the temperature difference is over or below
three degree, the machine will perform this
feature. You can set the temperature difference by
clicking arrows.
• Execute Now: The printer executes the auto color
registration now.
Option Description
Note
If Color Tone Adjustment Activation is set to Off, you need to
use Manual Color Tone Adjustment everytime you need to
adjust the color tone.
Auto Color
Tone
Adjustment
This item allows you to automatically adjust color
tone for the best possible color print quality.
• Color Tone Adjustment Activation: Activates
color tone adjustment. Press On to activate this
feature. If this option is On, the machine will
regularly and automatically adjust color tone.
• Setting Color Standard: Sets the standard for
adjusting color tone. You need to set this option at
least once when you purchase the machine. This
option will reduce the color difference between
machines by setting a color standard. (Page 3.1)
• Color Tone Adjustment: Adjusts the color tone.
This option uses the color standard you set in
Setting Color Standard and applies to the
machine.
Note: You need to set Setting Color Standard
option before using Color Tone Adjustment
option.
• Calibrating ID Sensor: Automatically calculates
the reduced or worn out supplies like toner or
machine parts and uses this information to adjust
the color tone. For example, if the yellow toner is
running out, the machine calculates the amount of
remaining yellow toner and adjusts color tone so
the printouts are fine.
Manual Color
Tone
Adjustment
This item allows you to quickly adjust color tone. You
can easily adjust the color tone and see the result
right away but it’s not a permenant adjustment. Use
this item to get a quick result.
Option Description