Filter
Top Products
6.14 <
Faxing (Optional)>
Forwarding a sent fax to other destination by
server
Note
If Forward to Email Setting is on, this option will be grayed out.
The server setting must be done in SyncThru Web Service prior
to this option on.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, enter
password and press OK. (Page 3.5)
3 Press the Setup tab > Fax Setup.
4 Press down arrow on the right side.
5 Press Fax Forward Settings > Forward to Server Setting > Send
Forward.
6 Press On.
7 Press OK.
Forwarding a received fax to other destination by
server
Note
If Forward to Email Setting is on, this option will be grayed out.
The server setting must be done in SyncThru Web Service prior
to this option on.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, enter
password and press OK. (Page 3.5)
3 Press the Setup tab > Fax Setup.
4 Press down arrow on the right side.
5 Press Fax Forward Settings > Forward to Server Setting >
Receive Forward.
6 Press Forward.
7 Press OK.
Setting up the end fax tone
The end fax tone that sounds to indicate that the fax has been received
can be turned on or off.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, enter
password and press OK. (Page 3.6)
3 Press the Setup tab > Fax Setup.
4 Press down arrow on the right side.
5 Press Fax Ending Sound.
6 Press On.
7 Press OK.
Setting up receiving faxes in color
This function allows you to recieve faxes in color.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, enter
password and press OK. (Page 3.6)
3 Press the Setup tab > Fax Setup.
4 Press down arrow on the right side.
5 Press Rx Color Printing.
6 Press On.
7 Press OK.