Filter
Top Products
7.6 <
Scanning>
4 Click Machine Settings > LDAP Server Setup. Then the LDAP
Server screen shows on the right side.
5 Enter IP Address or Host Name or Host Name and LDAP server
and Port.
6 Enter optional information.
7 Click Apply.
Note
The LDAP server administrator must store the email address
data. The method of storing is varies depending on the server
and the operating systems.
Entering email addresses by the address book
Once you have stored the frequently used addresses into the address
book, you can simply enter email addresses.
1 Press To ,Cc or Bcc tab from the Scan to Email.
2 Press Address Book.
3 Select Individual(Local), Group(Local), or Global.
4 Check the name of the recipient.
If you cannot find the recipient you want, press Search. Search
window shows. Press the initial alphabet key of the address you are
looking for. When the search is completed, the screen displays the
search results.
5 Press Apply. Keep selecting addresses as many as you want.
6 Press to return to Scan to Email.
Entering email addresses by the keyboard
When you press the input field in the From, To, Cc, or subject and
message input field, the keyboard shows on the display screen.
The following explanation is the example that you are entering
"abcdefg@abc.com".
1 Press From tab from the Scan to Email.
2 Press the input field.
3 Press a, b, c, d, e, f, g.
4 Press @.
5 Press a, b, c.
6 Press . and press c, o, m.
7 Press OK after finishing all the contents.
Using Samsung Scan Manager
If you have installed the printer driver, Samsung Scan Manager program
has installed too. Start Samsung Scan Manager program to find out
about this program information and the installed scan driver's condition.
Through this program, you can change scan settings and add or delete
the folders where scanned documents are saved in your computer.
Note
Tne Samsung Scan Manager program can only be used in the
Window and Macintosh system. If you use the Macintosh, see
Software section.
1. From the
Start
menu, click Control Panel > Samsung Scan
Manager.
Note
You can open Samsung Scan Manager by right clicking the
Smart Panel icon in the Windows task bar and seleting Scan
Manager.
2. Select the appropriate machine from the Samsung Scan Manager
window.
3. Press Properties.
4. The Set Scan Button tab allows you to change the saving
destination and scan settings, add or delete application program,
and format files.
You can change the scanning machine by using the Change Port
tab. (Local or Network)
5. When setting is done, press OK.