Filter
Top Products
8
Super G3 High-speed Communications
Provides state-of-the-art V.34 modem technology for worldwide compatibility at
speeds up to 33,600 bits per second.
High Resolution, 256 Level Halftone
With a maximum resolution of 16 dots/mm x 15.4 lines/mm (406 DPI x 391 LPI)
and 256 level halftone, precision drawings, small-size characters, photographs,
etc. are copied, sent, and received with exceptional clarity.
Open Network Mailbox Systems
Your new TOSHIBA provides ITU-T F-code communication for Open Mailbox op-
eration.
Hyper Scan Document Scanning
Allows letter sized originals to be scanned into memory in as little as 1.2 seconds
per page.
73 Programmable One Touch Autodialer Keys
Allows remote locations to be quickly dialed at the touch of a key saving time and
eliminating mis-dialed phone numbers.
300 Abbreviated Autodial Locations
In addition to the 73 One Touch Autodialer Keys, 300 abbreviated locations can
also be programmed with other frequently called locations. These locations can
then be easily accessed using abbreviated codes ranging from 001 to 999.
22 Function Keys
Twenty two frequently used functions are assigned to the keys located on the One
Touch Index Panel. These keys allow direct access to frequently used function
settings and operations.
Multi-address (Broadcast Transmission)
This feature allows the transmission of a document to multiple remote units with
one operation sequence. Locations may be selected using the autodialer or infre-
quently dialed locations that have not been preregistered.
Multi-Memory Access Operation
Allows up to 5 operations such as transmission or reception on either line 1 or line
2 (if so equipped), printing, scanning, and programming to be performed at the
same time.
Super Power Saver Mode
Reduces power consumption to approx. 2W by turning all unnecessary functions
off in the standby mode.
FEATURES
Substitute Memory Reception
When the recording paper or supplies have been depleted or in the event of a
recording paper jam, your receptions will be safely stored in memory until the
problem is corrected.
Memory Release
Minimizes the potential for memory overflows when connected with a remote loca-
tion. After each page has been successfully transmitted it is released from memory
to make room for subsequent pages.
TOSHIBA Viewer
Installing the TOSHIBA Viewer software that comes with the machine enables
following functions (see page 255).
• 600 dpi plain paper laser printer
PC print jobs are printed on plain paper at a crisp 600 dpi print resolution.
• Setting and programming the machine from a PC
You can set up and program the machine from a PC.
• PC Scanner function
The machine can be used as a Twain compatible B/W image scanner (16 dots/
mm x 15.4 dots/mm max.).
User Test Mode
The user test mode can help you to find the cause of a machine problem should a
failure occur.
PCL Printing (Option)
By installing the optional PCL Print Kit (GA-1020), the machine can be used as a
PCL printer. Adding the optional NIC Kit (GF-1010) enables to use the machine as
a network PCL printer.
Internet Fax Function (Option)
You can send a facsimile message via the internet by having the optional Internet
Fax Kit (GD-1040) and NIC Kit (GF-1010) installed in the machine.