Filter
Top Products
201
Press:
+
+
+
+
+
+
Relay Originator Report Setting
Display the RELAY
ORG. REPORT Menu
1
Select the desired option to print
a report whenever a Relay trans-
mission is sent.
NOTE:
This is only applicable if the
DP120F/DP125F is used as
an Originator for a relay trans-
mission (see page 134).
To ALWAYS print a report when-
ever a document is transmitted,
press:
To only print a report when an er-
ror has occurred, press:
To turn OFF Automatic printing of
reports, press:
To print a first page image of the
facsimile document on the trans-
mission report, press:
To not print a first page image of
the facsimile document on the
transmission report, press:
The following screen is dis-
played to confirm your selection.
Select the Option for
Relay Originator
2
Set the Option for
First Page Image
3
SET RELAY ORG. REPT.
1.ALWAYS
2.ON ERROR
3.OFF
PRINT 1ST PG IMAGE?
1.ON
2.OFF
OPERATION COMPLETED
After completing the Relay
Originator Report Setting, you
may continue to select other
Report settings referring to their
associated pages for instruction,
or press
to exit the Report Setting mode
and return to the Standby Mode.