Filter
Top Products
40
Date and Time Setting
This facsimile displays the cur-
rent date and time when in the
Standby Mode. It also uses this
time for maintaining internal list
and reports. Follow the proce-
dure to set the time and date.
To display the SETUP menu,
press:
+
Display the DATE &
TIME Menu
1
Select the time format.
(for 24-hour format)
(for 12-hour format) default
The date and time currently set
are displayed on the bottom
row.
When “24-hour” is selected:
Move the cursor to the desired
position using the following
keys.
or
Enter the date.
SET DATE & TIME
MD-DD-YYYY WWW
XX-XX-XXXX XXX
SET DATE & TIME
MD-DD-YYYY WWW
XX-XX-XXXX XXX
(Allows 00 to 23 as the hour
value.)
When “12-hour” is selected:
(Allows 01 to 12 as the hour
value and designates AM or
PM.)
Change the day-of-week desig-
nation by pressing the following
keys.
or
When the correct date is en-
tered, press:
Select the Time
Format
2
Enter the Date Data
3
Highlight
2.DATE & TIME
using or and
press:
or
SET TIME FORMAT
1.24 HOURS
2.12 HOURS
1.LANGUAGE
2.DATE & TIME
3.TERMINAL ID
4.DIAL TIPE
NOTE: Only 4 selections can
be displayed at one
time.
Move the cursor to the desired
position using the following
keys.
or
Enter the time.
When “12-hour” is selected,
change the AM/PM designation
by pressing the following keys,
or
When the correct time is en-
tered, press:
Enter the Time Data
4
SET DATE MODE
2.DD-MM-YYYY
3.YYYY-MM-DD
4.MM-DD-YY
5.DD-MM-YY
6.YY-MM-DD
SET DATE & TIME
HH:MM