Filter
Top Products
184
If communication errors fre-
quently occur while transmitting
documents due to bad line con-
ditions, we recommend you to
select a lower transmission
speed to enable quality trans-
missions. The transmission
speed will be restored to the de-
fault value automatically after
the low speed transmission is
completed.
You can activate this option
while programming an Abbrevi-
ated Dial Number (page 70) or
One Touch Dial Key (page 77) if
communication with a certain
remote party always requires
this option.
Select the desired speed.
To select OFF, press:
To select 14400 BPS, press:
To select 9600 BPS, press:
To select 4800 BPS, press:
Turn the Flip Panel to the “50-
73” view to select the desired
Function Key.
Press:
Load the document face down
in the Document Tray (see page
88).
Adjust the resolution and con-
trast if desired (see page 89).
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods or you
may designate another option at
this point.
• One Touch Key Dialing
... See page 97
• Abbreviated Dialing
... See page 98
• Alphabet Dialing
... See page 99
• Keypad Dialing
... See page 100
Low Speed Transmission
Load the Document
1
Select a Speed
3
Enter the Facsimile
Number
4
MAY-17-00 WED11:13
RESIDUAL MEMORY 100%
ENTER TEL NUMBER
COMM. RESERVATION
RESIDUAL MEMORY 100%
ENTER TEL NUMBER
Display the QUALITY
TX Menu
2
QUALITY TX
1.OFF
2.14400BPS
3. 9600BPS
4. 4800BPS