Filter
Top Products
98
When the correct number is dis-
played, press:
Once an Abbreviated Dial Num-
ber is programmed with a valid
remote facsimile location, that
location can be accessed by re-
calling the corresponding Abbre-
viated Dial Number.
The document must be loaded
and the resolution and contrast
set before a transmission using
Abbreviated Dialing (see page
89).
Press:
+
Enter the Abbreviated Dial
Number (1 to 999) assigned to
the desired party.
During transmission
NOTE:
When the number entered
(within the range of 1 through
999) is not preprogrammed
with a specific party’s fac-
simile or telephone number,
the message “NUMBER NOT
LISTED” is displayed for 2
seconds and then the fac-
simile returns to the screen in
Step 1.
Abbreviated Dialing
Press the SPEED
DIAL Key
1
Enter the
Abbreviated Number
2
Press the START Key Tray
3
ABB. NUMBER =(1-999)
COMM. RESERVATION
ABB. NUMBER =(1-999)
10
ABB. NBR= 10
LONDON OFFICE
ABB. NBR= 10
NUMBER NOT LISTED
NOTE:
When an incorrect number is
entered, use
to delete
preceding digits, or press
once to start over
from the beginning.
Example of Abbreviated Dial
Number, 10:
The One Touch key or Abbrevi-
ated Dial Number and the name
of the party will appear on the
LCD display for about 2 sec-
onds.
Your facsimile will automatically
start scanning the document into
memory (if enabled). While
scanning, the facsimile dials,
connects, and starts the trans-
mission.
Displayed for 2 second
SCANNING TO MEMORY
FILE NBR = 091
RESIDUAL MEMORY 99%
MAY-17-00 WED11:49
RESIDUAL MEMORY 99%
During scan to memory
Displayed for 2 seconds