Filter
Top Products
45
45
This facsimile has many user
adjustable settings.
Each of these configuration set-
tings is discussed in detail
throughout the remainder of this
section.
Use the following procedures to
access one or more of these
configuration settings.
Press
. The initial Menu
Screen displays.
Press
or until the desired Configuration Setting is
highlighted or enter the desired Configuration Setting 01 through 16
from the list below. The detailed configuration procedure for each
setting is shown in parentheses after the configuration setting.
01. SPEAKER VOLUME - (Page 47) - Sets the Bell Ring, Alarm
Tone, Key Touch Tone and Monitor volume (0-7) (4*) for the
machine.
02. POWER SAVER - (Page 51) - Configures the machine’s Super
Power Saver function for Automatic/Manual* or Off operation.
03. SEPARATOR PAGE - (Page 53) - Enables or Disables* a
FAX Separator Page, Copy Separator Page, and PC Separator
Page.
04. DEPARTMENT CODE - (Page 55) - Enables, Disables* and
Configures up to 99 Department Codes.
05. ACCOUNT CODE - (Page 58) - Enables or Disables* a 4-digit
Account Code entry.
06. PRINT DENSITY - (Page 59) - Sets the Print Density (-2-+2)
(0*) for the machine.
07. DOCUMENT LENGTH - (Page 60) - Enables* or Disables the
sending of documents longer than 1 Meter (39.4").
08. LINE MONITOR - (Page 61) - Enables or Disables* the Line
Monitor function.
09. RECEIVE INTERVAL - (Page 62) - Sets the interval (0-15
min.) the machine will wait after making four consecutive
dialings.
NOTE: * indicates the factory default setting.
10. ECM - (Page 63) - Enables or Disables* the ECM function.
- DEVICE CONFIGURATION
Press to enter DEFAULT
SETTING. The Default Setting
sub-menu displays.
Press
to enter MACHINE
SETTINGS. The Machine Set-
tings sub-menu will now dis-
plays.
NOTE: Only 4 selections can
be displayed at one
time.
1.COMM. OPTIONS
2.LISTS
3.INITIAL SETUP
4.DEFAULT SETTINGS ↓
1.MACHINE SETTINGS
2.TX SETTINGS
3.RX SETTINGS
4.REPORTS & LIST ↓
01.SPEAKER VOLUME
02.POWER SAVER
03.SEPARATOR PAGE
04.DEPARTMENT CODE ↓
05.ACCOUNT CODE
06.PRINT DENSITY
07.DOCUMENT LENGTH
08.LINE MONITOR
09.RECEIVE INTERVAL
10.ECM
11.DOCUMENT MODE
12.COLLATE COPY
13.LETTER HEAD PAPER
14.REDIAL MODE
15.AUTO RECEIVE MODE
16.LINE-2 MODE
Enter the Configuration Menu
1
Select the Desired Configuration Setting (01-16)
2
Configuration Summary