Filter
Top Products
42
Terminal ID Setting
In compliance with FCC regula-
tions (see page 1), this facsimile
places your company’s name,
facsimile telephone number and
date & time on the top of all
transmitted documents. This
feature enables remote parties
to easily identify your docu-
ments and the time of transmis-
sion.
To display the SETUP menu,
press:
+
Enter your user ID (company
name) using the Keyboard and
Numeric Keypad. You can use
up to 40 characters.
For more information on select-
ing characters, see page 34,
Character Entry.
When your ID name is displayed
correctly on the LCD display,
press:
Your facsimile will prompt you
for your telephone number’s in-
ternational code.
If you send documents over-
seas, adding your International
Code (country code) to your
stored ID name will enable the
remote party to identify the
country from which the docu-
ment has been sent. The 1st
digit(s) following the “+” sign is
for the International Code.
If you send or receive docu-
ments to and from overseas, se-
lect ADD + by pressing:
If all of your documents are sent
domestically, select NOT
NEEDED by pressing:
If you selected ADD+ in Step 3,
enter the International Code for
your country before entering
your area code and telephone
number.
Example: United States = 1
Then, enter the telephone num-
ber that has been connected to
the facsimile.
Highlight
3.TERMINAL ID
using or and
press:
or
SET TERMINAL ID
ID NAME =(MAX40)
Displayed for 2 seconds
If the terminal ID is already set,
the current name is displayed on
the last row.
ENTER NAME
ID NAME =(MAX40)
INT. CODE ?
1.ADD +
2.NOT NEEDED
The “+” is displayed when ADD+
is selected.
SET TERMINAL ID
TEL NUMBER =(MAX20)
+
Check the LCD display to make
sure your telephone number ap-
pears correctly, then press:
If the Line-2 board is installed
repeat Steps 3 and 4 for Line 2,
then go to Step 5.
Display the
TERMINAL ID Menu
1
Enter the User ID
2
Select the
International Code
3
Enter Your
Telephone Number
4
The new name will be displayed
on the last row as it is entered.
1.LANGUAGE
2.DATE & TIME
3.TERMINAL ID
4.DIAL TIPE
INT. CODE ? LINE-2
1.ADD +
2.NOT NEEDED
NOTE: Only 4 selections can
be displayed at one
time.