Filter
Top Products
190
Enabling or Disabling Send After Scan Temporarily
Load the Document
1
With the Send After Scan Mode
Default Setting set to “OFF”, this
feature allows you enable the
Send After Scan mode for a
single transmission. Once that
transmission is complete, the
default status is regained.
With Send After Scan selected,
every page of the doument will
be scanned into memory before
dialing will begin.
With Send After Scan set to NO
(off), your DP120F/DP125F will
begin dialing after the first page
is scanned to memory.
Load the document face down
in the Document Tray (see page
88).
Adjust the resolution and con-
trast if desired (see page 89).
MAY-17-00 WED11:13
RESIDUAL MEMORY 100%
ENTER TEL NUMBER
Turn the Flip Panels to the “50-
73” view to select the desired
Function Key.
Press:
Display the SEND
AFTER SCAN Menu
2
Select the desired Send After
Scan Option.
To disable Send After Scan,
press:
The following screen is dis-
played. You may dial the remote
facsimile for your communica-
tion job. The display will return
to the Standby Mode in about
60 seconds if no keys are
pressed.
OPERATION COMPLETED
Go to Step 5.
WHEN MEMORY FULL
1. DELETE SCAN PAGES
2. SEND SCAN PAGES
RESIDUAL MEMORY 100%
ENTER TEL NUMBER
After 2 seconds:
To enable Send After Scan,
press:
Go to Step 4.
Select the Send After Scan Option
3
SEND AFTER SCAN
1.YES
2.NO