Filter
Top Products
73
To select default settings, press:
To skip the Communication Op-
tions, press:
When “1.YES” is selected, the
COMM. OPTIONS screen ap-
pears. Complete the following
steps for each item selected.
This setting will allow you to
specify one or more of the fol-
lowing Communication Options
for the Abbreviated Dial Number
you are registering.
Delayed Communication
Default=off
Select to program a trans-
mission start time.
Transmission Report
Default=off
Enables or disables the
printing of a TX Report.
Line Monitor
Default=off
Enables or disables the line
monitor speaker during dial-
ing.
Quality TX
Default=off
Selects a lower modem
speed for poor communica-
tion links.
Sub Address
Default=none
Specifies a Sub Address for
the Abbreviated Dial Number
being registered. The remote
unit must support Sub-Ad-
dress capabilities.
Tel Line Select
Default=first available
Specifies which tel line is se-
lected when the 2nd Line is
installed.
Select the
Communication
Option
9a
If you have completed the de-
sired Communication Options
setting for this Abbreviated Dial
Number, select COMPLETE by
pressing:
Complete the Option
Setup
9b
Skip to Step 10.
ABB. NBR= 001
PRESS ONE TOUCH KEY
TO ENTER OR
[ENTER]:TO SKIP
Abbreviated Dialer Registration - continued
These items are outside the
LCD frame. To view them,
use the [ ] scroll key.
COMM. OPTIONS
1.COMPLETE
2.DELAYED COMM.
3.TX REPORT
4.LINE MONITOR
5.QUALITY TX
6.SUB ADDRESS
7.TEL LINE SELECT
To designate a specific time at
which operations using this Ab-
breviated Dial Number will be
dialed, press:
DELAYED COMM.
TIME =23:30
DELAYED COMM.
TIME =HH:MM
:
DELAYED COMM.
TIME =HH:MM
23:30
Enter the desired transmission
start time in either the 12-hour
or 24-hour format depending on
the machine setup. (example:
23:30 in the 24-hour format).
Then press:
Displayed for 2 seconds
The display returns to the first
screen in Step 9. Select the
next Option.
Delayed Communications
9c
Select Communication Options (Advanced Setup)
9