Filter
Top Products
168
Recovery Transmission allows
the operator to re-transmit a
document after failing the ini-
tially specified number of redial
attempts.
If the Recovery Transmission is
set to ON, the document is
stored in memory for a specified
length of time. You may retrans-
mit the document during this
time period without re-scanning
the original document.
Press:
+
+
+
+
Select the Recovery Transmit
option.
To turn ON Recovery Transmis-
sion, press:
Go to Step 3.
To turn OFF Recovery Trans-
mission, press:
Skip the procedure in Step 3.
Your setting is now complete.
The facsimile will display the
same screen shown in Step 3.
Enter the stored time length (01
to 24, in unit of hours).
Then press:
When completed, the following
screen is displayed. Press
to return to the Standby
Mode.
Select the TTI Print option.
To select INSIDE, press:
To select OUTSIDE, press:
To select OFF, press:
The display shows the screen
below to indicate that the menu
selection is accepted. To return
to the Standy Mode, press
.
TTI - continued Setting Recovery Transmission
Select the TTI Print
Option
2
Select the Recovery
Transmit Option
2
Enter the STORED
TIME
3
Display the
RECOVERY
TRANSMIT Menu
1
OPERATION COMPLETED OPERATION COMPLETEDRECOVERY TRANSMIT
1.ON
2.OFF
RECOVERY TRANSMIT
STORED TIME =(01-24)
06