9-8
ICL FTF File Transfer
Execute The file, which must be SCL or VME, will be submitted for
execution. See also Special options.
Print The file, which must be text, will be printed by the remote
system after the transfer has completed. See also Special
Options. This mode is used if you select direction To Host in
the main FTF dialog box and Print in this dialog box.
Read and remove The file must exist on the remote system. After being
transferred to the local system, it will be deleted on the
remote system.
Read The file must exist on the remote system and will be
transferred to the local system. This mode is used if you
select direction From Host in the main FTF dialog box.
Destructive read The file must exist on the remote system and will be erased as
it is transferred to the local system. This mode may not be
supported by the remote responder.
File Password
This text box enables you to enter a file password if one is required before you are
allowed to do a file transfer.
Information Message
This text box enables you to enter a message that may be logged in the remote sys-
tem's journal, depending on the remote implementation.
Account
This text box enables you to specify an account if required before you can do a file
transfer.
Account Password
This text box enables you to enter an account password if one is required before you
are allowed to do a file transfer.
Output Device Type
This enables you to specify the device to be used for output when you selected Print
for the remote file operation. If you are transmitting to VME, the value of this param-
eter is a property associated with the device to be used for output as specified in the
unit description.
Output Device Qualifier
This text box enables you to enter a qualifying string to the device to be used for
output when you selected Print for the remote action. If you are transmitting to VME
this will be interpreted as an identifier for printer stationery.