Filter
Top Products
11-4
Initialization Commands
You can view the contents of the private profile file used by the current instance of
TeemTalk by displaying the Startup Options dialog box from the File menu and
clicking the Edit... button.
The private profile file will already contain entries similar to the following, where
commands are grouped under headings enclosed by square brackets:
[Untitled.ses]
Wsp=tt07w.wsp
Nv=tt07w.nv
[Sessions]
Default=Untitled.ses
[Startup]
Dialog=1
SaveAsDefault=1
Editor=notepad.exe
Unless specified otherwise, all the initialization commands described in this chapter
must be entered under a new heading called:
[startup,default] for a set of commands to be used by default,
or
[startup,name] for a set of commands that can be used instead of the default
set, as specified by a command line option.
Each command must be entered on a separate line under this heading. Note that the
commands are not case sensitive.
The following default command group example will cause TeemTalk to attempt to
connect to a network host called neoware using the TCP/IP protocol and display two
levels of soft buttons.
[startup,default]
host=neoware
protocol=tcpip
buttonlevels=2
You can specify more than one set of startup commands in the private profile file.
Each set of commands other than the default set must have the following heading:
[startup,name]
where name can be any unique identifying name. You can specify which set of
startup commands TeemTalk is to use by including the following on the command line
for loading TeemTalk, where name is substituted with the actual name of the startup
group required:
-nname
If this command is not present then TeemTalk will use the startup commands under the
[startup,default] heading.