Filter
Top Products
12-41
Creating A Script File
FTP RM
Syntax: FTP RM LOCAL <filespec>
FTP RM REMOTE <filespec>
This FTP file transfer command will remove the specified local or remote file. Refer
to the Error Numbers section later in this chapter for a list of possible error numbers
for this command.
FTP SET
Syntax: FTP SET <mode>
This sets the file transfer mode to ASCII, BINARY or TENEX. Refer to the Error
Numbers section later in this chapter for a list of possible error numbers for this
command.
FTP TOOL
Syntax: FTP TOOL <boolean>
This will display or close the FTP dialog box.
FTP WD
Syntax: FTP WD LOCAL <variable>
FTP WD REMOTE <variable>
This FTP file transfer command will get the local or remote working directory and
place it in a previously defined string variable. Refer to the Error Numbers section
later in this chapter for a list of possible error numbers for this command.
FTU CANCEL
Syntax: FTU CANCEL
This will release the current links between TeemTalk and the file transfer utility
initiated previously by the ftu initiate command. Refer to the Error Numbers section
later in this chapter for a list of possible error numbers for this command.
FTU GET
Syntax: FTU GET <variable> <groupID> <paramID> [<subparamID>]
This command enables you to get information on a particular setting, where
<variable> is a previously defined string variable (see var) which will store the
information.