Filter
Top Products
E-14
Host Command Summary
Select terminal emulation mode ESC % ! * CODE *
(Host * 0 = Tek, 1 = ANSI, 2 = Edit, 3 = VT52,
5 = VT100N, 6 = VT220N, 7 = VT220M7,
8 = VT220M8)
POINT PLOT MODE HOST PRIMARY SETUP
Select marker type ESC | M *
SURFACES & COLOURS HOST PRIMARY SETUP
Assign colour to overlay/alternate set index ESC ] F *
Assign colour to overlay/principal set index ESC ] M *
Assign colour to overlay/principal/alt. set index ESC ] L *
Overwrite alternative colour index set ESC ] N *
Protect surfaces ESC ] W *
Select colour set & surface visibility ESC ] D *
Select combined surface & writing colour index ESC ] C *
Select overlaid surface & display priority ESC ] P *
Select overlaid surface & writing surface ESC ] O *
VECTOR MODE HOST PRIMARY SETUP
Activate area fill ESC | F *
Define fill pattern ESC | P *
Define line style ESC | L *
Define line style ESC ACK
Deselect block fill ESC ETX
Deselect write-through & selective erase ESC SOH
Enable selective erase ESC DLE
Enable write-through mode ESC NAK
Generate arc or circle ESC | A Q
Select block fill ESC STX
Select fill pattern ESC | P *
Select line thickness ESC | K *
Select vector mode GS
Specify line style (* = a through w and `) ESC *