Filter
Top Products
Maintenance Xerox 490/980 Color Continuous Feed Printing System
3-12 Printer Operator Guide
Color Mode Setting
You can select either Color or Black/White mode. To display the screen for selecting the color
mode, select [Printer Management] in the Menu screen, and then select the [Color Mode] tab.
"Monochrome" indicates the mode where data is printed with black toner only.
If the print mode is set to Monochrome, but the mode was already set to Color in the Color tab
on the Queue Management screen, a message will appear before a print job asking you to
confirm your desire to continue the job.
If the print mode is set to Color, but the mode was already set to Monochrome in the Color tab
on the Queue Management screen, no message appears before a print job.
Note
You cannot change the color mode when there is any active print job and the job is being
processed. To select the color mode, the printer has to be in the Paused status. If the status
is Idle, change it to Paused.
Selecting the Color Mode
To select the color mode, select either the [Monochrome] or [Color] button.
[Setting] and [Cancel] buttons
Select [Setting] to confirm the changes, or select [Cancel] to cancel the changes.