Filter
Top Products
Xerox 490/980 Color Continuous Feed Printing System Peripheral Devices
Printer Operator Guide 6-3
Cautions in Using the Pre- and Post-
Processing Devices
This section describes power-on steps and cautions taken after the machine is connected to the
Pre- and Post-Processing Devices.
Power-on steps and cautions
Follow the steps and cautions below after the machine is connected to the pre- and post-
processing devices.
Powering on
1. Power on the Pre- and Post-Processing Devices prior to powering on the machine.
2. Power on the machine
Caution in printing
Cautions for setting paper
Cautions for failure on the pre-processing and post-processing units
Caution
Before starting a print job, power on the Pre- and Post-Processing Devices and ensure they are
in the ready state.
Caution
• Before setting paper, check that the processing unit is in the ready status.
• When sending printer paper while the post-processing unit is not in the ready status, select
the [Reset] button on the printer’s operation panel to clear the error indication, then select
the [Forward] button.
Caution
When a failure occurs on the pre-processing unit, the message displayed on the printer's
operation panel may show an error message regarding the post-processing unit. This can
happen depending on the way that the pre-processing and post-processing units are
connected. If this problem occurs, check the status of the post-processing and pre-processing
units.