Filter
Top Products
Xerox 490/980 Color Continuous Feed Printing System Maintenance
Printer Operator Guide 3-25
ROF mark measurement value > 0.97 mm
Note
Adjustment value = (ROF mark measurement value - 0.97 mm)/0.5 mm (fractions rounded
off to a whole number).
1. Select the [-] button at Reading Position to set an adjustment.
2. Select the [Setting] button.
3. Reprint the job to make sure that no mark read error occurs.
4. If the mark read error persists, perform the
Reading Position Change Procedure on page 26 of
this chapter.
ROF mark measurement value = 0.97 mm
Note
This procedure is also for when the calculated value = 0.
Perform the
Reading Position Change Procedure on page 26 of this chapter.