Filter
Top Products
Xerox 490/980 Color Continuous Feed Printing System Cleaning
Printer Operator Guide 5-15
Cleaning the Fuser Station
Before cleaning the Fuser
1. To avoid hazards, do no start cleaning until the green lamp on the Fuser Station front door
is illuminated.
2. Pull out the Fuser before powering off the machine.
3. Use caution not to damage or break the glass surface.
Procedure for cleaning the Fuser Station
Do not leave the glass surface in the Fuser soiled. Toner may not adhere to the paper and
scumming may occur if the surface is not clean.
Toner particles may adhere to the glass surface during a print job. Check and clean the Fuser on
a daily basis.
Warning
Ensure your fingers are clear when closing the Fuser to avoid injury.
Caution
Do not open the Fuser Station front door until the green light illuminates.
Ensure that no pieces of paper or paper dust are left in the Fuser after cleaning. Paper may
catch fire and emit smoke if left inside of the Fuser Station.