Filter
Top Products
Xerox 490/980 Color Continuous Feed Printing System Basic Operation
Printer Operator Guide 2-51
If the paper edge is bent, curved or folded
If the paper edges bent, curved, or folded on the side guide, follow the steps below.
1. Load the paper again in the Feeder Station, and make sure the paper is placed in the
correct position.
2. Turn the right Paper Tension Dial 1 to the next lower level. If the right dial is already set to
[0], turn the left dial to the next lower level.
3. Close the Feeder Door and then select the [Eject] button on the touch screen to advance
the paper in the machine.
4. After 3 to 10 seconds, select the [Stop] button to stop feeding the paper.
5. Though the window on the Feeder Door, observe how the paper is running along the side
guide.
Warning
In the following step, do not touch the moving paper. Serious injury can result.
Window