Filter
Top Products
Maintenance Xerox 490/980 Color Continuous Feed Printing System
3-22 Printer Operator Guide
Paper width measurement value > Paper width setting
1. Select the [-] button at [Reading Position] to set an adjustment value.
Note
Adjustment value = (ROF mark measurement value - 0.97 mm)/0.5 mm (fractions rounded
off to a whole number).
2. Select the [Setting] button.
3. Reprint the job to make sure that no mark read error occurs.
4. If the mark read error persists, perform the
Reading Position Change Procedure on page 26 of
this chapter.