Filter
Top Products
Basic Operation Xerox 490/980 Color Continuous Feed Printing System
2-36 Printer Operator Guide
21. Adjust the Turn Bar position so that it is aligned with the upstream paper.
22. Select [Forward] on the upstream printer Fuser Station Panel to feed the paper for about 20
seconds to produce a slack in the paper on the buffer unit between upstream and
downstream printer.
23. After the splice passes the Turn Bar, cut the paper at the splice area. Then put the upstream
paper on top of the downstream paper to splice the paper ends again.
Downstream
paper
90 Turn Bar
Upstream
paper
Upstream
Fuser station
Turn bar
Buffer unit
Turn bar
Buffer unit