Filter
Top Products
Printer Operator Guide 5-1
Cleaning
Before Cleaning the Machine
This chapter provides information needed before cleaning the machine. When cleaning the
machine, always follow the precautions listed below.
Reloading paper
Reload paper after the cleaning of every area is complete.
Warning
• Keep toner away from your eyes and mouth. If toner gets on your skin, immediately wash
it off.
• When closing the Fuser Station, take care not to pinch your fingers.
• Be sure to switch off and unplug the machine before accessing the interior for cleaning,
maintenance or fault clearance to avoid possible electrical shock.
• When the machine is stopped, the paper inside the Fuser Station is heated to a very high
temperature. Do not open the Fuser Station until its green lamp is illuminated.
• When toner has spilled onto the floor, use a broom or a non-woven cloth moistened with a
neutral detergent. To avoid sparks and possible explosion, never use a household vacuum
cleaner to clean spilled toner.
Caution
• To clean the Fuser Station, open its door before powering off the machine. The Fuser
Station door will lock when the machine is powered off.
• Check the machine conditions each time before starting the machine or loading paper
stock not recommended by Xerox, regardless of suggested maintenance intervals.
Recycled paper in particular tends to generate paper dust affecting normal machine
conditions.
5