Filter
Top Products
Xerox 490/980 Color Continuous Feed Printing System Basic Operation
Printer Operator Guide 2-19
Loading Pinfed paper
When using pinfed paper, use the following instructions to load and use this particular paper
type.
1. Load the pinfed paper using the previous instructions on loading paper.
2. On the GUI screen, select [Paper Settings] and select [Pin Feed Hole] and select [Enable].
3. Enter the width of the paper.
4. Enter the paper Length. Pinhole paper length must be in whole or half-inch units. Ex: 11 0/6
inch, 11 3/6 inch, 12 0/6 inch.
5. Select [Paper Setting] at the top right of the screen.
6. Select [Settings] on the Feeder unit panel to enable the new paper.
7. If the pinfed paper has no pre-printed marks, ensure that all selected options match those
in the Pre-printed Info tab. The Pre-printed Enable/Disable should be set to Disable.