Filter
Top Products
Basic Operation Xerox 490/980 Color Continuous Feed Printing System
2-26 Printer Operator Guide
Splicing Paper
This section describes paper splicing. If the loaded paper runs out or is cut during a print job,
you can splice two pieces of paper of the same type with masking tape or other suitable
adhesive tape.
Before Splicing Paper
Follow the precautions as illustrated below.
Note
Ensure there is no waved or wrinkled paper on both of the simplex (Upstream) and duplex
(Downstream) sides.
• After opening the Feeder Door, align the left edges of paper pieces.
• Splice the pieces of paper within the following allowances:
L = 1.18 to 2.36 inch (30 to 60 mm) X1 = 0-0.08 inch (0 to 2 mm) X1 <= X2 <= 0.16 inch
(4 mm)
Paper feed direction
Upstream paper
X2X1
L
Downstream paper