Filter
Top Products
Basic Operation Xerox 490/980 Color Continuous Feed Printing System
2-42 Printer Operator Guide
9. Lift the Nip Release Lever at the Fuser Station to release the Roller.
10. Feed the paper manually until the splice passes the main Driver Roller.
11. Feed the sagging paper from the sheet guide in the print station into the Fuser Station. Pull
the paper at the paper exit to remove slack from the paper.
Note
Set the nip release sub-lever according to the paper width chosen on the simplex system.
12. Align the paper edges in accordance with the instructions on loading paper, then lock the
following pinches.
a. Feeder Station: Nip Release Lever, Nip Release Sub-Lever, Paper Tension Dial 1.
b. Fuser Station: Nip Release Lever.
Nip Release Lever
Roller
Main Driver Roller
Fuser Station