Filter
Top Products
Basic Operation Xerox 490/980 Color Continuous Feed Printing System
2-54 Printer Operator Guide
Eject Setting
You can change the paper ejection method that is used when the [Eject] button is selected.
Select the [Eject] button for approximately 3-5 seconds to display the screen shown below.
1. [Close] button - Select to close the screen with no action.
2. [Setting] button - Select to apply your changes and close the screen.
3. Mode - Select the paper ejection mode.
a. [Normal] - Every sheet of paper will be ejected.
b. [Page Specification] - Only the selected pages will be ejected.
4. Specify the number of pages using the virtual keypad, in the range of 1 to 1,023 pages.
While the Page Specification mode is selected, the specified page number appears on the
[Eject] button. For example, specifying "88" changes the appearance of the [Eject] button
as shown below.
Note
The Number of Pages field is enabled only when the [Page Specification] button is
selected. At the start and end of paper feeding, the actual amount of ejected paper may be
different from the specified number of pages.