Filter
Top Products
3-46
CHK
ADJ
CHECKING AND CHARGING THE BATTERY/
CHECKING THE FUSES
CAUTION:
CAUTION:
NOTE:
6. Check:
Sbattery vent
Obstruction ! Clean.
Damage ! Replace.
7. Install:
Sbattery
8. Connect:
Sbattery leads
(to the battery terminals)
First, connect the positive lead
1
, then the
negative lead
2
.
9. Check:
Sbattery terminals
Dirt ! Clean with a wire brush.
Loose connection ! Connect properly.
10. Lubricate:
Sbattery terminals
Recommended lubricant
Dielectric grease
11. Install:
Sseat
EAS00181
CHECKING THE FUSES
The following procedure applies to all of the
fuses.
To avoid a short circuit, always turn the main
switch to “OFF” when checking or replacing
a fuse.
1. Remove:
Sseat
2. Check:
Sfuse
a. Connect the pocket tester to the fuse and
check the continuity.
Set the pocket tester selector to “Ω x 1”.