Filter
Top Products
5-5
CARB
CARBURETORS
CAUTION:
NOTE:
10. Check:
Sjet needle kit
1
Sneedle jet
2
Smain jet
3
Spilot jet
4
Spilot screw
5
Bends/damage/wear ! Replace.
Obstruction ! Clean.
Blow out the jets with compressed air.
11. Check:
Spiston valve movement
Insert the piston valve into the carburetor
body and move it up and down.
Tightness ! Replace the piston valve.
12. Check:
Sfuel feed pipes
Shose joint
Cracks/damage ! Replace.
Obstruction ! Clean.
Blow out the pipes with compressed air.
13. Check:
Sfuel feed hoses
Sfuel hoses
Cracks/damage/wear ! Replace.
Obstruction ! Clean.
Blow out the hoses with compressed air.
EAS00489
ASSEMBLING THE CARBURETORS
The following procedure applies to both of the
carburetors.
SBefore assembling the carburetors, wash
all of the parts in a petroleum-based sol-
vent.
SAlways use a new gasket.
1. Install:
Sneedle jet
1
Spilot jet
Smain jet
Align the slot
a
on the needle jet with the pro-
jection
b
on the carburetor body.