Filter
Top Products
6-55
CHAS
THE HANDLEBAR
NOTE:
NOTE:
NOTE:
NOTE:
WARNING
WARNING
3. Install:
Shandlebar grip
1
Sleft grip end
2
There should be 1 X 3 mm of clearance
a
be-
tween the handlebar grip and the left grip end.
4. Install:
Sleft handlebar switch
1
Align the pin on the left handlebar switch with
the hole
a
in the handlebar.
5. Install:
Smaster cylinder (clutch)
1
Smaster cylinder bracket
2
Align the mating surfaces of the master cylinder
with the punch mark
a
on the handlebar.
6. Install:
Sthrottle grip
1
Sthrottle cable housing
2
Sthrottle cables
3
Apply a thin coat of lithium soap base grease
onto the inside of the throttle grip and install it
onto the handlebar.
Make sure that the pin
a
on the throttle
cable housing is aligned with the hole
b
in
the handlebar.
7. Install:
Sright grip end
1
Sright handlebar switch
2
Make sure that the throttle grip operates
smoothly.