Filter
Top Products
1-4
GEN
INFO
CHECKING THE CONNECTIONS
NOTE:
NOTE:
NOTE:
EAS00026
CHECKING THE CONNECTIONS
Check the leads, couplers, and connectors for
stains, rust, moisture, etc.
1. Disconnect:
Slead
Scoupler
Sconnector
2. Check:
Slead
Scoupler
Sconnector
Moisture ! Dry with an air blower.
Rust/stains ! Connect and disconnect sev-
eral times.
3. Check:
Sall connections
Loose connection ! Connect properly.
If the pin
1
on the terminal is flattened, bend it
up.
4. Connect:
Slead
Scoupler
Sconnector
Make sure that all connections are tight.
5. Check:
Scontinuity
(with a pocket tester)
Pocket tester
90890-03112
SIf there is no continuity, clean the terminals.
SWhen checking the wire harness, perform
steps (1) to (3).
SAs a quick remedy, use a contact revitalizer
available at most part stores.