Filter
Top Products
7-33
Open-circuit voltage
12.8 V or more at 20_C
YES
Replace the fuse(-s).
NO
YES
SClean the battery
terminals.
SRecharge or re-
place the battery.
NO
Replace the main
switch.
NO
EAS00749
3. Main switch
SCheck the main switch for continuity.
Refer to “CHECKING THE SWITCHES”.
SIs the main switch OK?
YES
1. Main and signaling system fuses
SCheck the main and signaling system fuses
for continuity.
Refer to “CHECKING AND CHANGING
THE FUSES” in chapter 3.
SAre the main and signaling system fuses OK?
2. Battery
SCheck the condition of the battery.
Refer to “CHECKING THE BATTERY” in
chapter 3.
SIs the battery OK?
NO
EAS00795
4. Wiring
SCheck the entire signaling system’s wiring.
Refer to “CIRCUIT DIAGRAM”.
SIs the signaling system’s wiring properly con-
nected and without defects?
YES
Properly connect or
repair the signaling
system’s wiring.
Check the condition
of each of the signal-
ing system’s circuits.
Refer to “CHECKING
THE SIGNALING
SYSTEM”.
SIGNALING SYSTEM
ELEC
NOTE:
EB806010
TROUBLESHOOTING
SAny of the following fail to light: turn sig-
nal light, brake light or an indicator light.
SThe horn fails to sound.
Check:
1. main and signaling system fuses
2. battery
3. main switch
4. wiring
(of the entire signaling system)
SBefore troubleshooting, remove the following
part(-s):
1) seats
2) fuel tank
3) headlight unit
STroubleshoot with the following special
tool(-s).
Pocket tester
90890-03112
EAS00738
EAS00739