Filter
Top Products
3-47
CHK
ADJ
CHECKING THE FUSES
WARNING
Pocket tester
90890-03112
b. If the pocket tester indicates “∞”, replace the
fuse.
3. Replace:
Sblown fuse
a. Turn off the ignition.
b. Install a new fuse of the correct amperage
rating.
c. Turn on the switches to verify if the electrical
circuit is operational.
d. If the fuse immediately blows again, check
the electrical circuit.
Fuses
Amperage rating
Quantity
Main
fuse
30 A 1
Headlight
fuse
15 A 1
Signaling system
fuse
15 A 1
Ignition
fuse
7.5 A 1
Reserve
30 A 1
15 A 1
7.5 A 1
Never use a fuse with an amperage rating
other than that specified. Improvising or us-
ing a fuse with the wrong amperage rating
may cause extensive damage to the electri-
cal system, cause the lighting and ignition
systems to malfunction and could possibly
cause a fire.
4. Install:
Sseat