Filter
Top Products
7-30
Headlight
Tester positive probe !
yellow or green
Tester negative probe ! black
High beam indicator light
Tester positive probe ! yellow
Tester negative probe ! black
SSet the main switch to “ON”.
SSet the light switch to “ ”.
SSet the dimmer switch to “ ” or “ ”.
SMeasure the voltage (12 V) of yellow (green)
on the headlight coupler (headlight side).
SIs the voltage within specification?
1 2
3
4
5
2
YES
Replace the meter
light bulb, socket or
both.
NO
EAS00789
2. A meter light fails to come on.
1. Meter light bulb and socket.
SCheck the meter light bulb and socket for
continuity.
Refer to “CHECKING THE BULBS AND
BULB SOCKETS”.
SAre the meter light bulb and socket OK?
The wiring circuit
from the main switch
to the headlight cou-
pler is faulty and must
be repaired.
NO
YES
2. Voltage
SConnect the pocket tester (20 V) to the meter
assembly coupler (wire harness side) as
shown.
Tester positive probe ! blue
Tester negative probe ! black
1
2
This circuit is OK.
Replace the tail/
brake light bulb, sock-
et or both.
NO
YES
The wiring circuit
from the main switch
to the meter assem-
bly coupler is faulty
and must be re-
paired.
NO
This circuit is OK.
EAS00790
3. A tail/brake light fails to come on.
1. Tail/brake light bulb and socket
SCheck the tail/brake light bulb and socket for
continuity.
Refer to “CHECKING THE BULBS AND
BULB SOCKETS”.
SAre the tail/brake light bulb and socket OK?
YES
SSet the main switch to “ON”.
SSet the light switch to “ ” or “ ”.
SMeasure the voltage (12 V) of blue on the
meter assembly coupler (wire harness side).
SIs the voltage within specification?
1
ELEC
LIGHTING SYSTEM