Filter
Top Products
3-25
CHK
ADJ
ADJUSTING THE FRONT BRAKE/
ADJUSTING THE REAR BRAKE
NOTE:
b
a
a
c
WARNING
a
b
WARNING
EAS00107
CHASSIS
ADJUSTING THE FRONT BRAKE
1. Adjust:
Sbrake lever position
(distance
a
from the throttle grip to the
brake lever)
a. While pushing the brake lever forward, turn
the adjusting dial
1
until the brake lever is in
the desired position.
Be sure to align the setting on the adjusting dial
with the arrow mark
2
on the brake lever hold-
er.
Position #1
Distance is the larg-
est.
Position #4
Distance is the small-
est.
After adjusting the brake lever position,
make sure that the pin on the brake lever
holder is firmly inserted in the hole in the ad-
justing dial.
EAS00110
ADJUSTING THE REAR BRAKE
1. Check:
Sbrake pedal position
(distance
a
from the top of the rider footrest
to the top of the brake pedal)
Out of specification ! Adjust.
Brake pedal position (below the
top of the rider footrest)
45 mm
2. Adjust:
Sbrake pedal position
a. Loosen the locknut
1
.
b. Turn the adjusting bolt
2
in direction
a
or
b
until the specified brake pedal position is ob-
tained.
Direction
Brake pedal is lowered.
Direction
Brake pedal is raised.
After adjusting the brake pedal position,
check that the end of the adjusting bolt
2
is
visible through the hole
3
.