Filter
Top Products
7-7
ELEC
CHECKING THE BULBS AND BULB SOCKETS
NOTE:
CHECKING THE CONDITION OF THE BULB
SOCKETS
The following procedure applies to all of the
bulb sockets.
1. Check:
Sbulb socket (for continuity)
(with the pocket tester)
No continuity ! Replace.
Pocket tester
90890-03112
Check each bulb socket for continuity in the
same manner as described in the bulb section;
however, note the following.
a. Install a good bulb into the bulb socket.
b. Connect the pocket tester probes to the re-
spective leads of the bulb socket.
c. Check the bulb socket for continuity.
If any of the readings indicate no continuity,
replace the bulb socket.