Filter
Top Products
4-35
ENG
CLUTCH
NOTE:
NOTE:
NOTE:
EAS00275
REMOVING THE CLUTCH
1. Straighten the lock washer tab.
2. Loosen:
Sclutch boss nut
1
While holding the clutch boss
2
with the univer-
sal clutch holder, loosen the clutch boss nut.
Universal clutch holder
3
90890-04086
3. Remove:
Sclutch boss nut
1
Slock washer
2
Sclutch boss
3
Sthrust washer
4
Sspacer
5
Sbearing
6
Sclutch housing
7
Insert two 6 mm bolts
8
into the spacer and
then remove the spacer by pulling on the bolts.
EAS00280
CHECKING THE FRICTION PLATES
The following procedure applies to all of the fric-
tion plates.
1. Check:
Sfriction plate
Damage/wear ! Replace the friction plates
as a set.
2. Measure:
Sfriction plate thickness
Out of specification ! Replace the friction
plates as a set.
Measure the friction plate at four places.
Friction plate thickness
2.9 X 3.1 mm
<Limit>: 2.8 mm