Filter
Top Products
2-7
SPEC
MAINTENANCE SPECIFICATIONS
Model Standard Limit
Piston rings:
Top ring:
Type
Dimensions (B T)
End gap (installed)
Side clearance (installed)
2nd ring:
Barrel
1.00 3.05 mm
0.20 X 0.35 mm
0.045 X 0.080 mm
SSS
SSS
0.6 mm
0.1 mm
Type
Dimensions (B T)
End gap (installed)
Side clearance (installed)
Oil ring:
Taper
1.2 3.0 mm
0.35 X 0.50 mm
0.03 X 0.07 mm
SSS
SSS
0.75 mm
0.1 mm
Dimensions (B T)
End gap (installed)
Side clearance
2.5 2.9 mm
0.2 X 0.5 mm
0.050 X 0.155 mm
SSS
SSS
SSS
Connecting rod:
Oil clearance
0.017 X 0.040 mm 0.08 mm
Crankshaft:
Crank width “A”
Assembly width “B”
Runout limit “C”
Big end side clearance “D”
Journal oil clearance
62.25 X 63.85 mm
382.0 X 383.2 mm
0.02 mm
0.160 X 0.262 mm
0.030 X 0.064 mm
SSS
SSS
SSS
0.5 mm
0.09 mm