Filter
Top Products
6-6
CHAS
FRONT WHEEL AND BRAKE DISCS
NOTE:
NOTE:
NOTE:
CAUTION:
EAS00544
INSTALLING THE FRONT WHEEL
The following procedure applies to both brake
discs.
1. Lubricate:
Swheel axle
Soil seal lips
Recommended lubricant
Lithium soap base grease
2. Install:
Sbrake disc
1
SApply LOCTITE
648 to the threads of the
brake disc bolts.
STighten the brake disc bolts in stages and in a
crisscross pattern.
3. Install:
Sspeedometer gear unit
Make sure that the speedometer gear unit and
the wheel hub are installed with the two projec-
tions
a
meshed into the two slots
b
respec-
tively.
4. Install:
Sfront wheel
Make sure that the slot
a
in the speedometer
gear unit fits over the stopper
b
on the outer
tube.
5. Tighten:
Swheel axle
1
Swheel axle pinch bolt
2
Wheel axle
73 Nm (7.3 mSkg)
Wheel axle pinch bolt
19 Nm (1.9 mSkg)
Before tightening the wheel axle nut, push
down hard on the handlebar several times
and check if the front fork rebounds
smoothly.